Product Description
66L 1150 PSI 4-Gas Calibration Gas – 12.0% Oxygen Extreme Deficiency Blend
This custom 4-gas calibration cylinder is engineered for validation of multi-gas detector performance under extreme oxygen depletion conditions.
At 12.0% oxygen, this mixture simulates a highly deficient atmosphere intended for advanced alarm response verification and high-severity hazard modeling.
Gas Composition Profile
Hydrogen Sulfide (H₂S): 25 PPM
Carbon Monoxide (CO): 100 PPM
Methane (CH₄): 2.5% (50% LEL)
Oxygen (O₂): 12.0%
Balance Gas: Nitrogen
Methane at 2.5% equals 50% LEL for combustible sensor validation.
Carbon monoxide at 100 PPM supports toxic gas alarm confirmation.
The 12.0% oxygen concentration represents an extreme deficiency simulation used for advanced detector validation beyond standard OSHA threshold checks.
Cylinder Technical Specifications
Cylinder Size: 66L (2.3 Cubic Feet)
Fill Pressure: 1150 PSI
Valve Type: C-10
Cylinder Material: Aluminum
Gas Reactivity: Reactive
Blend Type: Custom Mix
The 1150 PSI fill provides extended usable volume for structured, high-intensity calibration cycles.
Intended Use Environments
• Advanced confined space simulation programs
• Emergency response scenario validation
• Detector alarm escalation confirmation
• Industrial safety stress testing
• Hazard modeling verification
This blend is not intended for routine bump testing but for structured high-severity validation protocols.
Custom Production Notice
This 12.0% oxygen calibration gas is produced as a custom blend. Manufacturing lead times may vary depending on production scheduling.
